October 12, 2009

Set up Asterisk conference calling with MeetMe.

Filed under: Reports,vowlan — Tags: , , , , , , , , , , — John @ 7:10 pm
Asterisk phone

Asterisk phone

I made my first (2-way) conference call on Asterisk/Meetme just now. To enable MeetMe with Asterisk, you first need to edit your meetme.conf in /etc/asterisk/ , mine looks like this:

; Configuration file for MeetMe simple conference rooms for Asterisk of course.
; This configuration file is read every time you call app meetme()

audiobuffers=32    ; The number of 20ms audio buffers to be used
; when feeding audio frames from non-Zap channels
; into the conference; larger numbers will allow
; for the conference to ‘de-jitter’ audio that arrives
; at different timing than the conference’s timing
; source, but can also allow for latency in hearing
; the audio from the speaker. Minimum value is 2,
; maximum value is 32.
; Usage is conf => confno[,pin][,adminpin]
; Note that once a participant has called the conference, a change to the pin
; number done in this file will not take effect until there are no more users
; in the conference and it goes away.  When it is created again, it will have
; the new pin number.
conf => 1234

- apparently, it’s important to leave a blank line at the end of the file. All this does is define a conference room at 1234, with 32 x 20ms audio buffers (the default).

Next, you need to edit the extensions.conf (also in /etc/asterisk) to define how to get to your conference room – I added a line like this at the end, just after where my other users were defined:

exten => 1234,1,MeetMe(1234)

… so now, when Asterisk is restarted, it should enable the conference facility when ’1234′ is dialled. It’s not so simple though.
MeetMe needs a reference clock to work properly, and it doesn’t have one by default. There’s a software clock in the package zaptel-source called ztdummy which needs compiling, but the current Ubuntu 9.04 source won’t compile; there’s a bug. Happily, this has been fixed – you need to add this Personal Package Archive to your list of sources in Synaptic, and install it’s key, fetch the packages zaptel and zaptel-source using Synaptic,  then compile it using the command:
sudo m-a a-i zaptel
… now when you restart your Asterisk and dial into 1234, you should get a voice recording telling you that you’re ‘the only person in this conference’.

1 Comment

  1. [...] Set up Asterisk conference calling with MeetMe. – I made my first (2-way) conference call on Asterisk/Meetme just now. [...]

    Pingback by Portable VoWLAN: A portable voice over wireless local area network for mobile learning « VoWLAN — November 30, 2009 @ 11:55 pm

RSS feed for comments on this post.

Sorry, the comment form is closed at this time.

Powered by WordPress